Drywall board production line Introduction
Drywall board production line is a special machine for Drywall board production, our company will strictly control the raw material of the production line to ensure that the customer's final product with international quality standards, at the same time, my factory's production line using German technology, steel demolition sturcture, it can ensure the production line runs smoothly and save 30 days installation time as least, so save the installation charge.
Main system
Paper supply-Raw material supply-Form system-Cutting system-Turnover system-Drying system-Shaping and sealing system-Packing system.
Drywall board production line Features
1. The core of this Drywall Board Production Line is the Drying system. Both Hot wind and Hot oil heating way, we can make it well and our technology is very mature, we specilly study and research and develop the Drywall board production line over 20 years.
2. The machine is equipped with the most advanced Honey comb Mixer, which can mix all the raw material together evenly to form the Gypsum slurry.
3. Our Drywall board production line with most advanced technology and best steel material.
4. Full-automatic, easy to control, runs smoothly, high efficiency and energy saving.
Drywall Board Production Line Main euqipments introduce :
1. Paper supply system
It has the unique way of splicing and high-density correction institutions, what's more, the nick played a very helpful role for the further plastic and trimming. Quality of the product can be greatly improved, and reduce a lot of unnecessary waste, thus reducing costs.
2. Powder supply system
It has the core of unique quantitative feeder, the supply of gypsum powder to make very precise which provides a great convenience for the further mixing, coupled with pneumatic discharge device so that a reliable supply protection for the feed powder.
3. Water supply system
About this water supply system using hot water switch, the product not only improves the strength quality, but Oslo save the energy, adopt the professional accuracy pump water provides a great convenience.
4. Foam system
This system uses a unique barostat supply, dedicated pump for the foam, and the bubble into the liquid to a uniform paste, for the operation provides great convenience, and therefore the weight of the product easier to adjust master.
5. Forming system
The introduction of foreign technology, use of special stainless steel strong edge pneumatic vertical mixer with special stainless steel plate forming machine, so that the system greatly enhanced wear resistance, longer service life. Replaced by the original plate forming machine roll lamination, improved the smoothness f board.
6. Convey system
Except the conventional conveyor system, a further increase in the waste plate cleaning machine, not only reduces the labor intensity, but also to plant sanitation and clean.
7. Transmit system
It is the most advanced non-powered fast-forward into the body panels to reduce energy consumption, and the various parts of assembly are improved overall, more reliable operation of the machine.
8. Drying system
The drying system is the core set of production lines, it directly affects the production line output and energy consumption, this system adopts the unique radiator structure, may layer temperature control, section temperature control, plus new and unique air system, so that the temperature and humidity levels of the system is adjustable, which played a role in reducing energy consumption and make the operation of the system easier to grasp, is the key to reducing test costs.
9. Heating system
This system used the heat transfer fluid heaters (hot oil heater), it is a low-pressure high-temperature heating device. It is oil, coal, gas as fuel to oil as the carrier is the preferred heating gypsum board production equipment. In addition, the use of flue gas heat exchanger to reduce energy consumption and reduce costs.
10. Length system
The system with a unique flap machine and palletizing unit became the latest length system, thus ending the history of artificial cut-off plates, lower labor cost.
11. Dust control system
Using electronic pulse bag filter system to improve the dust removal, and the other to increase the dust auger and more convenient to clean up dust.
Drywall Board Production Line FAQ
Q: Are you trading company or manufacturer ?
A: We are a professional gypsum board producing line manufacturer for more than 12 years.
Q: How long is your delivery time?
A: Normally for 2 months to 3 months .
Q: How many containers will be needed?
A: According to the capacity.
Q: What is your terms of payment ?
A: We can accept L/C or T/T.
Q:What is your advancage and service ?
A:Firstly , we own up-to-date technology and experienced research and develop team , provide you with strong technical support .
Secondly , we provide free design, including plant layout, equipment diagram according to your demand .
Thirdly , we supply raw material and machine one stop servcie .
Fourthly, arrange practised techicians installing and training oversea as soon as you receive the machines .
All in all , our resource is your resource
Hot Tags: drywall board production line, China drywall board production line manufacturers, suppliers, factory, building construction equipment list, Gypsum Board Production Line Turkey, German Quality Advanced Technology Gypsum Plaster Board New Machine, inline slitters, Ethiopia Gypsum Board Production Liner, Gypsum Board Production Machinery
