Fiber Reinforced Cement Board: An Overview

Mar 27, 2026 Leave a message

 

---

**Fiber reinforced cement board** (abbreviated as cement board) is a flat cement board for building, which is produced with fiber and cement as the main raw materials. It is widely used in various fields of construction industry for its superior performance. Generally speaking, the **fiber reinforced cement board** is used for steel structure interlayer floor, with a thick plate of 24mm, or floor king, and is used for LOFT apartment and indoor interlayer floor.


Chinese name fiber reinforced cement board
Mbth Fiber reinforced cement board
Short for cement board
Gauge 1200x2400x4-60mm
The special point itself is heavier.
LOFT apartment and indoor partition floor should be used.
Plate moving and cutting

 

The **fiber reinforced cement board** itself is relatively heavy, and it takes at least two people to move the whole uncut board. The thickness of 4mm-6mm belongs to thin plate, which is fragile compared with thick plate, so it needs to be moved carefully before installation, and it is easy to be broken and damaged if it is not protected. It takes at least two people to install the fiber cement board, one to stabilize the position of the board and the other to fix it with special nails. Cutting fiber cement board usually requires a chainsaw or a mechanical cutter, and there are three ways to cut it:
1. The thin plate can be cut and broken with a heavy cutter.
2. Use fiber cutting machine (Australian cutting method)
3. Thick plates or high-density plates need chainsaw cutting.


Pay attention to the wind direction in the process of cutting plates, try to avoid powder inhalation, wear a mask or special protective tools, and plate powder may cause diseases if it enters the lungs for a long time. After the installation is completed, various paints can be applied for whitewashing (waterproof paints are required for places exposed to the air). Wood blocks need to be filled at the joints of the fixed plates, and the whole surface of the plates needs to be painted, which can prolong the service life of the plates. The maintenance workload of fiber cement board installed and fixed and painted is very small. Thick plates and high-density plates have good impact resistance, but thin plates and low-density plates need to be protected from external impact. Compared with wood wallboard, fiber cement board will not produce termites, will not rot easily, and has better corrosion resistance.

 

 

1. According to the inner fiber: most of the domestic asbestos fibers are used for reinforcement, and this fiber cement board is called chrysotile fiber cement board; The other one is that it does not contain asbestos fiber, and pulp, sawdust and glass fiber are used to replace asbestos fiber for reinforcement, which are collectively called asbestos-free fiber cement slab.

 

Fiber Cement Board: The Eco-Friendly Choice for Durable and Stylish Construction


2. According to density: low density is 0.9-1.2g/cm3, medium density is 1.2-1.5g/cm3, and high density is 1.5-2.0g/cm3. Low density is generally used in low-grade building ceilings, partition walls and other parts, medium density is generally used in mid-grade building partition ceilings, and high density is generally used in high-grade building steel structure external walls, steel structure floors, etc. China's fiber cement board is divided into two categories according to the national construction industry standards. The disadvantages of high density fiber cement board are easy to deform, and the deformation coefficient of medium and low density products is smaller.


3. According to the pressure: whether there is a pressure plate or not. Medium and low density fiber cement boards are all pressboard-free, while high density fiber cement boards are pressure boards.


4, according to the thickness: ultra-thin plate, 2.5-3.5 mm; Conventional plate, 4-12 mm; Thick plate, 13-30 mm; Extra thick plate, 31-100mm. Ordinary manufacturers can't make ultra-thin and ultra-thick plates, which is also an important basis for measuring the production capacity and technical level of enterprises in the industry. [1]

 

characteristic

1. Fire prevention and insulation: it does not burn Grade A, and the board will not burn when a fire occurs, and it will not produce toxic smoke; It is an ideal insulating material with low conductivity.


2, waterproof and moisture-proof: in semi-open air and high humidity environment, it can still maintain the stability of performance and will not sink or deform.


3. Thermal insulation and sound insulation: low thermal conductivity, good thermal insulation performance, high product density and good sound insulation.


4. Light weight and high strength: the plate pressed by a 7,000-ton flat oil press is not only high in strength, but also difficult to deform and warp; Light weight, suitable for roof suspended ceiling and other aspects.


5. Simple construction: dry operation mode, simple installation and construction of keel and plate, speed fast, and deep-processed products also have the characteristics of simple construction and better performance.


6, economic and beautiful: light, with the keel, effectively reduce the cost of engineering and decoration; The appearance color is uniform and the surface is flat, and the direct use can make the color of the building surface uniform.


7. Safe and harmless: it is lower than the national "Radiation Health Protection Standard for Building Materials", and the measured index is equal to the lawn value 20 meters away from the surrounding buildings.


8, long life: acid and alkali resistance, corrosion resistance, and will not be damaged by moisture or insects and ants, and the strength and hardness will increase with time to ensure a long service life.


9. Good machinability and secondary decoration performance: sawing, drilling, carving, nail drilling, painting, and pasting materials such as ceramic tiles and wall covering can be carried out according to actual conditions. [2]

applied range

Internal and external walls and partitions: fireproof and heat-insulating structures; Ceiling ceiling; Sound insulation and sound absorption structure; Kitchen and toilet door panels, wallpaper protection;
Curtain wall liner: steel structure cladding; Anti-static floor, furniture board
Place of use: commercial buildings: shopping malls, office buildings, hotels, entertainment places.
Industrial sites: warehouses, workshops and computer rooms.
Residential buildings: residential quarters and villas.


Public places: hospitals, theaters, stations, libraries, offices, external partition walls, ceiling ceilings, firewalls, curtain wall linings, ceilings, steel floor slabs, fire doors, external wall thermal insulation panels, grouting wall panels, roof system thermal insulation linings, ground slabs, anti-static floor substrates, clear water decorative panels, external wall decorative panels, external wall thermal insulation panels, external wall dry-hanging panels, industrial thermal insulation panels, and so on.