How Can Fiber Cement Board Production Lines Meet New Standards for Wastewater and Exhaust Emissions?

Apr 19, 2026 Leave a message

I think most people will agree that there have been many instances of changes in environmental policy throughout the past several years, not just in China but across many other markets outside of China. Therefore, I would like to take this opportunity today to share with you a few initiatives we are currently undertaking, in the hope that they may offer you some useful insights.

Calcium Silicate Board Making Machine

Why Has the Focus on Environmental Protection Suddenly Intensified?

In recent years, domestic regulatory enforcement regarding industrial emissions has indeed become increasingly rigorous. Within our specific sector-the cement and building materials industry-we have just experienced yet another tightening of atmospheric pollutant emission standards. The standards are changing and now have more stringent regulations on all drying equipment that uses independent heat sources regarding how much airborne particulate matter it can emit. Effective May 1, 2026, the maximum permitted emission concentration for all types of air-drying systems will be reduced from previous limits to just 10 mg/m³ of particulate matter. The same holds true for emissions of sulfur dioxide (SO₂) and nitrogen oxides (NOx). Both of these pollutants will have emission standards of just 50 mg/m³ and 70 mg/m³ respectively. There is no longer any acceptable level of emissions-every milligram must be precisely measured.


Similarly, the new *Ecological Environment Code of the People's Republic of China*, effective from 15 August 2026, establishes a stricter "red line" regarding green compliance applicable to the whole of building materials production. Therefore, environmental compliance is no longer considered merely an "added value" in business; it is now also a condition for business "survival." All manufacturers will no longer be able to function normally in their manufacturing operations if they cannot pass the environmental compliance hurdle, regardless of the manufacturing capabilities or product quality.

So, How Exactly Should Production Lines Be Modified? Our Strategy Is a "Three-Pronged Approach."

To be honest, we were also initially anxious about these new regulations. But to be clear, anxiety is not productive; rather, the real solution is a complete and comprehensive redesign of how we do things in production. Right now, our company has focused its improvement efforts on 3 critical sources of waste: wastewater, waste gas, and solid waste.

 

Regarding **wastewater**, our objective is "zero discharge." During the production process-specifically in stages such as the mixing of raw materials for fiber cement boards and equipment cleaning-a significant amount of wastewater is generated. In the past, this water would simply undergo a basic sedimentation process before being discharged; however, that is no longer permissible. We have implemented a strict "separation of rainwater and sewage" system throughout our facility. Industrial wastewater created through the manufacturing process undergoes treatment using multi-stage sedimentation tanks and is then fully recycled back into the manufacturing process, ensuring that none is thrown away outside of the facility. Domestic waste is put through a septic system and then disposed of through the municipal sewer system in an appropriate manner.

 

**Waste gas treatment** constitutes the core of this "tough battle." Dust generated along the production lines, as well as flue gases emitted from boiler operations, must all undergo sophisticated, precision-engineered treatment processes. For instance, on our newly installed sanding, edge-grinding, and cutting production lines, all processing zones have been enclosed to create sealed spaces. The waste gases created during our workshop's production process flow through ductwork to a pulse-jet baghouse dust collection system where they will be treated prior to being released into the atmosphere. Because of the operation of this system, our workshop is kept clean; and our emissions are always well below the limits established by current environmental standards.

 

Additionally, the production of fiber cement boards involves a specific stage prone to generating odors: the venting of the autoclave. Drawing upon established best practices within the industry for waste gas treatment, we route the steam vented from the autoclave into a cooling pool to lower its temperature. It then passes through a multi-stage activated carbon adsorption system, ensuring that pollutants-such as ammonia and VOCs-are effectively captured and controlled before the treated gas is released. Although this process entails significant additional operating costs, it is a critical safeguard that simply cannot be compromised.

 

Regarding solid waste utilization, we have successfully transformed "waste" into "resources." The offcuts generated during production-along with the dust collected by our dust removal systems-were once a persistent headache in terms of disposal. Now, we sort and collect these materials systematically: a portion is recycled back into the production system as raw material, while the remainder is entrusted to certified specialized agencies for resource recovery. Both storage and disposal are conducted in strict compliance with regulatory standards. This approach not only reduces our solid waste disposal costs but also significantly boosts the overall utilization efficiency of our raw materials.

 

What Does This Mean for Overseas Clients?

 

After reading all this, you might ask: "What does any of this have to do with us as buyers?" I believe it has a great deal to do with you.

First and foremost, a supplier capable of withstanding intense environmental scrutiny-and maintaining continuous, compliant operations-is a supplier whose production output is inherently stable. Many small domestic factories have recently had to stop production and fix their non-compliance with environmental standards, causing major disruptions in supply chains. If we put more effort on the front of implementing environmental safeguards - particularly at times like this - we can more confidently assure you that your orders will be delivered in a timely manner.

In addition, an environmentally friendly and sustainable manufacturing process is reflected in the finished product. The fiber cement boards we provide are, by design, environmentally friendly building materials, containing only natural inorganic materials, free from any formaldehyde, and made without the use of any asbestos. With our added emphasis on cleaning up and improving the sustainability of our manufacturing process, our products are even better able to meet the increasingly stringent environmental certification criteria required for export markets. The global construction materials sector is now faced with even more environmental requirements, such as the Construction Products Regulation in Europe. This regulation also places a firm environmental requirement on all building materials to provide a Digital Product Passport. By doing our environmental due diligence today, we are providing ourselves with a solid basis for future easy export business.

Fiber Cement Board Processing Line