For overseas buyers sourcing fiber cement board, the first question is usually not "which supplier" but "which board for which application." Danae Building Materials Technology has put together its fiber cement board product line around that question.
The range covers several common specifications. Standard sizes include 1220mm x 2440mm and 1200mm x 2400mm, with thickness options from 4.5mm to 30mm depending on the product type. Surface density typically falls between 1.3 and 1.4 g/cm³, and bending strength ranges from above 14 MPa to above 18 MPa across different thicknesses.
Matching the board to the job
Different applications call for different boards, and mixing them up is one of the more common sourcing mistakes.
For exterior walls, high-density fiber cement board panels are the usual choice, given the load-bearing and weather-exposure requirements. For ceilings, lighter boards with consistent thickness matter more than density. For interior walls, standard fiber cement board panels work well, and pre-coated options can reduce finishing steps on site.
Pre-coated inorganic boards are worth a closer look for projects where on-site painting is difficult or where the schedule is tight. These boards come with the finish already applied, which cuts labor time and reduces the risk of inconsistent surface quality across a large installation.
What buyers tend to ask about
Fire rating and moisture performance come up in almost every inquiry. Fiber cement board is classified as incombustible (Class A), and water absorption is typically under 10%. Freezing resistance tests show no delamination after 25 cycles. These are the numbers specifiers want to see before approving a material for exterior or wet-area use.
Another frequent question is whether the board contains asbestos. Danae's product line is asbestos-free, which is a baseline requirement for most markets now. A full list of available boards, including pre-coated and high-density options, is on the fiber cement board products page.
Customization and capacity
The company supports OEM/ODM production, including custom sizes, thicknesses, and surface finishes. Annual production capacity for interior wall panels runs at 8 million square meters, with two lines dedicated to fiber cement board panels at a combined capacity of 5 million. That matters for buyers running multi-phase projects who need consistent supply across orders.
Samples and factory price quotes are available on request.